Certikin Commercial Grade LED Underwater Flood Light (Updated 01/10)

• 14 number high powered 1-2 watt white LED’S
  Nearly 2000 candela, the best of the rest is less than 1000!
• Can be used with existing Certikin transformers PU11H or PU11S.
  Voltage range ac 9v-18v
• Uses a 5th of the power of a 100w halogen bulb. Average 2.1amps
• 2 stage leak test carried out during assembly under vacuum conditions to remove any moisture inside the lamp housing.
• Custom designed individual lens fitted to each LED to direct the light to where it’s needed.
• Borasilicate scratch resistant glass lens cover will not discolour or scratch over time.
  316 stainless steel body.
• IP68 brass nickel plate gland, double sealed resin bonded with a cable support.
  Life time silicone ‘o’ ring seal between machine rolled stainless steel and borasilicate glass lens.

Installing LED lights or upgrading existing lights to LED not only saves money but also helps to reduce your carbon footprint as each light will reduce energy consumption by at least 80% compared to traditional lights. Add to this the minimum life expectancy of 50,000 hours (Eco-Star) and 100,000 hours(Hi-Performance) and you’ll agree, there really is no better solution for under water lighting.

PU9 Eco-Star White LED U/W Lights

PU6 Quick Change Eco-Star White LED U/W Lights

Eco-Star White LED components

PU9 Hi-performance White LED U/W Lights

Certikin LED PAR 56 Type Lamps (Updated 01/10)

• High intensity LED lighting. Environmentally friendly thanks to its long life (100,000 hours) and high energy efficiency (uses 80% less power than a traditional lighting system)
• Power Supply 12v
• Power consumption 45W
• 18 1W LED's (6 x red, green and blue)
• Initial output 745 lumens
• IP x 8 protection
• 14 modes - 7 set colours + 7 sequences

Par 56 multicolour lights can be contolled in 2 ways:

1. By installing a push button for each light
2. With a control panel which can be synchronised up to 15 lights. An optional remote control is available for control panel